Product Overview

The SMW7060S series represents a line of inductors designed for various electronic applications. These components are characterized by their specific dimensions, electrical characteristics including impedance, DC resistance, rated current, and rated voltage, and are available in multiple part numbers (P/N) to suit different needs. They are constructed using high-quality materials such as ferrite cores, 2UEW wire, and are suitable for reflow soldering processes, as indicated by the provided IR Reflow profile. Reliability testing confirms their performance under various environmental conditions, including operating temperature, terminal strength, insulation resistance, and dielectric strength.

Product Attributes

• Brand: sunltech
• Material: Ferrite Core (SINCORES OR EQ), 2UEW P180 Wire (ELEKTRISOLA OR EQ), DM Tape (HENGRENXIN OR EQ), Sn Cu Solder (SHENMAO OR EQ), Epoxy ME-5890 (PENGNO OR EQ), Black Ink (BON MARK)
• Taping Specification: Transparent carrier and cover tape, Adhesive strength of cover tape: 20 to 120 gf, Conduction band direction: 80-165. Available in 200m/m and 400m/m component lengths.
• Operating Temperature: -30 to +100
• Reliability: Meets requirements for Appearance Inspection, Terminal Strength (10N for 10+/-2 sec), Heat endurance of reflow soldering, Insulating resistance (>100 M at 100V D.C.), Dielectric Strength (0.5KV 3mA for 1 minute), Temperature characteristics (Inductance coefficient (0~2,000) 10/), Humidity characteristics (Inductance deviation within 10% after 96 hours in 90~95% RH at 40 2 and 1 hour drying).

Technical Specifications

IR Reflow Profile:

• Preheating: 150-200
• Soldering: 255
• Time above 230 : 10 sec
• Total time: more than 2 min (1 to 4 min)
• Cooling: Natural cooling