| General Specifications |
| Output Frequency Range | F | | | 156.25 | MHz | |
| Total Frequency Stability | F_stab | -20 | | 20 | ppm | Includes initial tolerance, aging, operating temp, supply voltage,
and load variations |
| Operating Temperature Range | T_use | -20 | | 70 | | Commercial Grade |
| Operating Temperature Range | T_use | -40 | | 85 | | Industrial Grade |
| Operating Temperature Range | T_use | -40 | | 105 | | Extended Industrial Grade |
| Operating Temperature Range | T_use | -55 | | 125 | | Automotive Grade |
| Supply Voltage | VDD_1.8 | 1.62 | 1.8 | 1.98 | V | |
| Supply Voltage | VDD_3.3 | 2.97 | 3.3 | 3.63 | V | |
| Supply Voltage | VDD_XX | 2.25 | | 3.63 | V | |
| Supply Voltage | VDD_YY | 1.62 | | 3.63 | V | |
| Current Consumption | Idd | | 4.2 | 4.9 | mA | No Load, F=20MHz, VDD=1.8V |
| Current Consumption | Idd | | 4.5 | | mA | No Load, F=20MHz, VDD=2.5V |
| Current Consumption | Idd | | 4.5 | 4.9 | mA | No Load, F=20MHz, VDD=2.8V to 3.3V |
| Standby Current | I_std | | 0.6 | 1.5 | A | ST=GND, VDD=1.8V |
| Standby Current | I_std | | 0.8 | | A | ST=GND, VDD=2.5V |
| Standby Current | I_std | | 1.5 | | A | ST=GND, VDD=2.8V to 3.3V |
| Duty Cycle | DC | 45 | 50 | 55 | % | Full Voltage Range |
| Output Low Voltage | VOL | | | VDD0.1 | V | IOL=2mA (VDD_1.8V) |
| Output Low Voltage | VOL | | | VDD0.1 | V | IOL=3mA (VDD_2.5V & VDD_2.8V) |
| Output Low Voltage | VOL | | | VDD0.1 | V | IOL=4mA (VDD_3.0V & VDD_3.3V) |
| Output High Voltage | VOH | VDD0.9 | | | V | IOL=-2mA (VDD_1.8V) |
| Output High Voltage | VOH | VDD0.9 | | | V | IOL=-3mA (VDD_2.5V & VDD_2.8V) |
| Output High Voltage | VOH | VDD0.9 | | | V | IOL=-4mA (VDD_3.0V & VDD_3.3V) |
| Rise/Fall Time | Tr, Tf | | 1.7 | | ns | VDD=2.5V, 2.8V, 3.0V or 3.3V, 20% to 80% |
| Rise/Fall Time | Tr, Tf | | 1.9 | | ns | VDD=2.25V to 3.63V, 20% to 80% |
| Rise/Fall Time | Tr, Tf | | 2.2 | | ns | VDD=1.8V, 20% to 80% |
| Input Low Voltage | VIL | | | VDD0.3 | V | Pin 1, OE or ST |
| Input High Voltage | VIH | VDD0.7 | | | V | Pin 1, OE or ST |
| Startup Time | T_start | | 5.0 | | ms | Measured from VDD reaching its nominal minimum |
| Enable/Disable Time | T_oe | | | 130 | ns | F=180MHz. Other frequencies, Toe = 100ns + 3cycles |
| Resume Time | T_resume | | 5.0 | | ms | Measured from ST pin exceeding 50% threshold |
| RMS Period Jitter | T_jitt | | 2.2 | | ps | F=75MHz, VDD=2.5V, 2.8V, 3.0V or 3.3V |
| RMS Period Jitter | T_jitt | | 2.8 | | ps | F=75MHz, VDD=1.8V |
| Peak-to-Peak Period Jitter | T_pk | | 23.3 | | ps | F=75MHz, VDD=2.5V, 2.8V, 3.0V or 3.3V |
| Peak-to-Peak Period Jitter | T_pk | | 28.5 | | ps | F=75MHz, VDD=1.8V |
| RMS Random Jitter | T_phj | | 0.5 | | ps | F=75MHz, Integration Bandwidth=900kHz to 7.5MHz |
| RMS Random Jitter | T_phj | | 1.3 | 2 | ps | F=75MHz, Integration Bandwidth=12kHz to 20MHz |
| Environmental Compliance |
| Shock Resistance | | | | 60,000 | g | MIL-STD-883F, Method 2002 |
| Vibration Resistance | | | >70 | | g | MIL-STD-883F, Method 2007 |
| G-Sensitivity | | <0.1 | | | ppb/g | |
| Moisture Sensitivity Level | | | MSL1 | | | @ 260C |
| Pin Definitions |
| 1 | OE/ST /NC | I/O | Output Enable (OE): High [1]: Specified frequency output; Low: High
impedance output. Standby (ST): High [1]: Specified frequency
output; Low: Output low (weak pull-down), device enters standby
mode, power current reduces to I_std. NC: No Connect. Any voltage
between GND and VDD or open [1]: Specified frequency output. Pin 1
has no function. |
| 2 | GND | | Power Ground |
| 3 | CLK | CLK Output | Oscillator Output |
| 4 | VDD | Power | Supply Voltage [2] |